Cooper Security i-on160EX Guía de instalación descargar pdf (Pagina 87)

i-on160 Installer Menu Options

Page 81

“

Delete Messa

e?” press Y.

Use Lid Tamper This puts the control unit into a special mode where the

tamper switch controls the recording and playback of the

current message. Use this mode if the control unit is an

inconvenient distance from the keypad.

1. Start with the control unit lid off and the tamper switch open.

2. At the keypad select Use Lid Tamper and press Y.

3. At the control unit hold down the tamper switch. When the red LED on the

I-SD02 glows recite your message.

4. Release the tamper switch.

5. Pulse the tamper switch briefly.

The i-sd02 plays back your recording.

6. Go back to the keypad and press X.

7. If required, replace the control unit lid. DO NOT replace the control unit

lid until you have left the “Use Lid Tamper” mode.

Phone Book

To record the telephone numbers that you wish to use, select Communications –

Speech Dialler – Phone Book. (See “Destinations” on page 82 for instructions how

to link messages to phone numbers.)

Select one of the telephone numbers.

The display shows the current digits of the selected telephone number.

Key in the telephone number. Press * to add a two second pause, if required.

The display shows this as a comma.

Press Y when you are happy that the number is correct.

The display then gives you a chance to key in a name for that number. The

control unit will display this name in the phone book to help you remember

what destination you wanted the message to go to. (See page 12 for hints on

editing text.) Press Y when you are happy that the name is correct.

Note that once you have set the speech dialler call mode to “enabled” (see

page 80) and assigned a report trigger a message, and a message to a

telephone number (see below) then the control unit makes this number

available in the User Menu. User 01 can enter a new telephone number in this

slot at will. This allows the user to re-direct any speech message destined for

this number. The user cannot disable the telephone number by entering a

blank number; the fact that they have changed the number is logged.

Triggers

In the i-on160EX you can link up to five different trigger events to each speech

message. A trigger event is one item selected from a list of alarm types.

To link specific trigger events to individual messages select Communications –

Speech Dialler – Triggers.

The display shows a list of speech messages. (Note that the home message

does not appear. The control unit always sends the home message at the

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 179 180

Comentarios a estos manuales

Sin comentarios

Cooper Security i-on160EX Guía de instalación Pagina 87

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Cooper Security i-on160EX