Cooper Security i-on160EX Guía de instalación descargar pdf (Pagina 47)

i-on160 Installer Menu Options

Page 41

The control unit displays the name you give to the keypad when it is reporting

faults or other events, making it easier to locate the affected device.

Assigning Wired Keypads to Partitions

The i-on160EX allows you to assign keypads to any of the partitions.

When delivered from the factory, or if you restore the control unit to factory

settings, then all keypads belong to partition 1.

Once you have assigned a keypad to a partition then that keypad will display

messages and give tones for the assigned partition(s).

Note: If you do not assign a keypad to a partition (and there is no loudspeaker

assigned to the partition) then users of that partition will not be able to

hear entry/exit tones and alerts for the partition.

Any user can use any keypad. While they are using a keypad the display shows

information from partitions assigned to the user, not to the keypad.

Once you have entered the Edit Keypads - Partitions option, press u or n to

scroll through the list of partitions followed by > or < to allocate/deallocate

the keypad to each partition as necessary.

If you wish to allocate/deallocate the keypads to many partitions you can use

the “All Partitions” option (in between partition 1 and 20 on the menu) to

either allocate or deallocate the keypad to all partitions in one operation. Once

you have carried out this operation you can then scroll through the partition

list and change the allocation of keypads as necessary.

Programming Quick Set Keys

Note: If you enable the quick set keys the control unit no longer complies with

EN50131. See page 61.

You can program the quick set keys (A, B, C and D keys) to perform one of

several actions. The actions depend on the setting type of the system:

partitioned or part set.

In a part setting system the installer can program the quick set keys to Full

Set, Part Set B, Part Set C or Part Set D.

In a partitioned system you can program a quick set key to full set or part set

individual partitions.

Each keypad can have a different arrangement of quick set keys. For example

the A key on keypad 1-02-01 might part set partitions 1 and 2, but on keypad

1-02-02 it could be programmed to full set partition 3.

In either part setting or partitioned systems you can program a quick setting

key to trigger a user defined output. See page 51 for a description of user

defined outputs.

In addition, each of the A, B, C or D keys can have a name. The keypad

displays this name while the system is setting after the user presses that key.

See page 121 for an example of how to program a quick setting key.

Deleting Keypads

Use this menu option to delete keypads from the system. See page 102 for

detailed instructions.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 179 180

Comentarios a estos manuales

Sin comentarios

Cooper Security i-on160EX Guía de instalación Pagina 47

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Cooper Security i-on160EX