Cooper Security i-on160EX Guía de instalación descargar pdf (Pagina 152)

Step by Step Programming Procedures i-on160

Page 146

Press u or n to see other partitions.

8. Press Y to start the test.

The display shows for example:

24 Zone(s) to test

Zone 020

9. Tri

er the alarm and tamper of each zone.

As you trigger the zones the top line of the

display shows the number of zones remaining

to test. The bottom line shows the first in a list

of zones that you have selected for testing.

Each zone that you test shows an “A” if you

have tested the Alarm contacts and a “T” if you

have tested the tamper.

The chime tone will sound for each zone you

activate if you have enabled Chime.

Press if you wish to see a list of the zones

not yet triggered.

23 Zone(s) to test

Zone 020 TA

10. Press u or n to scroll up or down the list of

zones.

Press X to finish the test.

To test the zones in an expander:

1. Enter the installer menu and select Test (see

steps 1 to 4 in “To start testing” on page 144).

TEST

Sirens & Sounders >

2. Press n until the display shows:

TEST

Walk Test >

3. Press Y.

The bottom line of the display gives you the

opportunity to turn the chime feature on or off.

WALK TEST

Chime On

4. Press < or > to toggle between Chime On or

Chime Off.

5. Press n until the display shows:

WALK TEST

Expanders >

6. Press Y.

The display shows:

WALK TEST EXPANDERS

W1-02 Wired Expandr>

7. Press Y to start the test.

The display shows for example:

24 Zone(s) to test

Zone 020

1 2 ... 147 148 149 150 151 152 153 154 155 156 157 ... 179 180

Comentarios a estos manuales

Sin comentarios

Cooper Security i-on160EX Guía de instalación Pagina 152

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Cooper Security i-on160EX