Cooper Security i-on160EX Guía de instalación descargar pdf (Pagina 74)

Installer Menu Options i-on160

Page 68

When logging into the i-on160EX Web Server you must key into the password

field the same code as you have programmed into the Installer Code field.

Keypad Text

If required the installer can key in a text message that appears on the first line

of the display in the standby screen. This could be, for example, the name of

the installer’s company. See page 12 for hints on editing text.

Remote needs Entry

Instead of using an entry timer triggered by a Final Exit zone to allow the user

to gain access to the control unit and unset the system, the user can employ a

remote control. To chose between either of these options select: System Options

– Remote needs Entry. The options available are:

Enabled The user must first tri

er an entry zone and start the entry

timer before unsetting the system with a remote control.

Disabled The user can unset the system using a remote control without

first starting the entry timer.

PA Response

During a PA alarm the control unit starts communications (provided you have a

communication module fitted and enabled, or the communications outputs

wired to an appropriate communicator and correctly programmed). This option

controls the associated audible alarm.

Audible As well as starting communications the control unit starts PA

alarm tones from the keypads and loudspeakers, and activates

any siren outputs. The sirens follow the Siren Time (see page

69). The loudspeakers operate until a user silences the alarm.

Silent The control unit keeps the PA alarm silent: there are no alarm

tones from keypads or loudspeakers and any siren outputs or PA

outputs remain inactive. The control unit signals the PA using the

communications device(s).

Displayed All keypads display a PA alert message immediately (a user does

not have to key in their access code to see the message). If

more than one PA is active then the keypad display scrolls

through the alert messages at roughly one second intervals.

The control unit also starts PA alarm tones, activates any siren

outputs, and starts communications, as described for the

“Audible” option.

Note: All PAs are disabled when the system is in Installer Menu.

Auto Rearm

(Appears when if System Options – DD243 – Confirmation is set to “Off”, see page

62.)

To change the number of times that the system will re-arm when the siren

time expires select: System Options-Auto Rearm.

Select NEVER to make the system never re-arm (the system will go into alarm

once only). Select one of the other options to make the system re-arm once,

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 179 180

Comentarios a estos manuales

Sin comentarios

Cooper Security i-on160EX Guía de instalación Pagina 74

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Cooper Security i-on160EX