Cooper Security 9751 Manual de instalación descargar pdf (Pagina 90)

4. Programming

Page 82 496964

In a partitioned system, the options are:

Option

0 Timed. Use this option if Partition B sets after an exit time selected

using Command 65. If an Exit Terminate button is fitted, the user may

use it to shorten the exit time.

1 Terminate. Use this option if the user completes setting the partition

by pushing an Exit Terminate button connected to a keypad. The exit

time is infinite in this option.

2 Final Door Set. Use this option to complete setting the partition by

closing a door fitted with a Final Exit zone detector. The exit time is

infinite in this option.

3 Instant Set (no exit tone)

4 Silent Set. Use Command 65 to program the Exit time. At the end of

the exit time the keypad gives a double "beep" confirmation tone.

5 Lock Set. See "Level A Exit Mode (Command 39) for an explanation

of Lock Set.

Note: The keypads give a double "beep" confirmation tone at the end of all

setting modes.

63: Level/Partition B Alarm Response

This Command sets the alarm response for Level or Partition B.

In a single system, the options are:

Option

0 Keypad sounders only.

1 Internal sounders and keypad sounders.

2 Local alarm (internal and external sounder only).

3 Full alarm (communication and internal/external sounders).

In a partitioned system, the options are:

Option

0 Keypad sounders only.

1 Local alarm (internal and external sounder only).

2 Full alarm (communication and internal/external sounders).

64: Level B Entry Time

This Command has been replaced by Command 202.

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 147 148

Sin comentarios

Cooper Security 9751 Manual de instalación Pagina 90