Cooper Security 9751 Manual de instalación descargar pdf (Pagina 106)

4. Programming

Page 98 496964

111: Modem Speed (9851 only)

Use this command to set the speed of the modem inside the 9851 (built-in

communicator).

Option

0 Automatic baud selection: tries to connect at 1200 baud; if that fails,

connects at 300 baud.

1 300 baud (default)

112: Rings to Answer

Use this command to set the number of rings for which the system waits

before answering an incoming call from the remote PC.

Option

0 3 rings

1 5 rings (default)

2 7 rings

3 10 rings

4 15 rings

5 255 rings

113: Answer on One Ring

If the alarm system shares a telephone line with other equipment, use this

Command to instruct the control unit how to interpret one ring on the shared

line.

Option

0 One Ring off. The control unit does not respond to one ring.

1 One Ring on. The control unit interprets one ring as a message from

Downloader to expect a call within 10 to 90 seconds.

Operation: Downloader calls once, waits for one ring and then

disconnects. It then waits for 10 to 90 seconds before calling again, at

which time the control unit answers after the first ring.

Note: When using One Ring mode, set the number of rings in "Rings to

Answer" (Command 112) to a higher number than that used by the

equipment with which the alarm system shares a line. If you do not, the

other equipment will never answer any incoming calls because the

control unit will answer them first.

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 147 148

Sin comentarios

Cooper Security 9751 Manual de instalación Pagina 106