Cooper Security 9751 Manual de instalación Pagina 84

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 148
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 83
4. Programming
Page 76 496964
41: Bell Delay
When the system is set and (for example) an intruder violates a zone, the
system waits for the programmed Bell Delay before operating the external
sounder for the programmed Bell Duration. This Command sets the Bell
Delay.
Option
0 No delay (default)
1 1.5 minutes
2 3 minutes
3 5 minutes
4 10 minutes
5 15 minutes
6 20 minutes
Note: Command 41 has no effect if Alarm Confirmation (Command 89) is
enabled and any of the following applies:
External Sounder (Command 162) is set to option 0
Internal Sounder (Command 161) is set to option 0
Alarm Response Mode (Commands 47, 63, 73 and 77) does not require
communications.
42: Bell Duration
When an alarm occurs, the system waits for the programmed Bell Delay
before operating the external sounder for the programmed Bell Duration. This
Command sets the Bell Duration.
Option
1 1.5 minutes
2 3 minutes
3 5 minutes
4 10 minutes
5 15 minutes
6 20 minutes (default)
43: Level A Entry Time
This Command has been replaced by Command 201.
Vista de pagina 83
1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 147 148

Comentarios a estos manuales

Sin comentarios