Cooper Security i-on40 Guía de instalación descargar pdf (Pagina 94)

Testing i-on40

Page 90

2. Key in the digits of the telephone number you wish to

call.

3. Press Y to start the test call.

The keypad display shows the progress of the call:

“Dialling” while the speech dialler is dialling the

telephone number, followed by “Connecting” when

the called number is ringing. The display shows.

“Connected” when the called number answers,

followed by “Playing Messages” (after six seconds). If

the called number presses 5 or 9 the display shows

“Acknowledged”.

Note: If you key in a valid user access code before the

speech dialler connects to its first destination then

the control unit will cancel the call.

PSU Current

This option allows you to see how much current the

control unit is consuming.

View Log

The control unit keeps a log of the last 1,000 events (for

example, alarms and setting/unsetting). You can read the

log when the system is completely unset.

1. Select View Log from the Installer Menu.

The display shows you the most recent log event.

2. Press u or n to scroll through the log.

n shows earlier events.

u shows more recent events.

3. Press > to see more details in the first line of the

display.

4. Press X when you have finished reading the Log.

Note: To comply with EN50131-1:2006 for Grade 2

systems the log is divided internally into two portions:

mandatory events and non-mandatory events. The

mandatory portion of the log can store up to 750 events,

and the non-mandatory portion of the log can store up to

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 115 116

Sin comentarios

Cooper Security i-on40 Guía de instalación Pagina 94