Cooper Security 9751 Guía de usuario descargar pdf (Pagina 36)

2. Programming Commands

Page 30 497096, issue 3

In a partitioned system, the options are:

Option

0 Timed. Use this option if Partition B sets after an exit time selected

using Command 65. If an Exit Terminate button is fitted, the user may

use it to shorten the exit time.

1 Terminate. Use this option if the user completes setting the partition

by pushing an Exit Terminate button connected to a keypad. The exit

time is infinite in this option.

2 Final Door Set. Use this option to complete setting the partition by

closing a door fitted with a Final Exit zone detector. The exit time is

infinite in this option.

3 Instant Set (no exit tone). Use this option to make the system set

without delay or exit tone.

4 Silent Set. Use this option to make the system set without an exit

tone. Use Command 65 to program the exit time.

5 Lock Set. See Command 39 on page 20 for an explanation.

63: Level/Partition B Alarm Response

This command sets the alarm response for Level or Partition B.

In a single system, the options are:

Option

0 Keypad sounders only.

1 Internal sounders and keypad sounders (default).

2 Local alarm (internal and external sounder only).

3 Full alarm (communication and internal/external sounders).

In a partitioned system, the options are:

Option

0 Keypad sounders only.

1 Local alarm (internal and external sounder only).

2 Full alarm (communication and internal/external sounders) (default).

Note: Compliance with PD 6662 / prEN 50131-1: 2004 (see page 85) requires that

Command 63 is set to option 2 in a partitioned system.

64: Not used

Level B Entry Time has been replaced by Command 201–204.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 95 96

Sin comentarios

Cooper Security 9751 Guía de usuario Pagina 36