Cooper Security 9853 Guía de instalación descargar pdf (Pagina 86)

4. Programming

80 496791

Note: 1. If the control unit is using Fast Format signalling, and has sent a Burg to the

ARC, then the control unit activates the output pin assigned to Comms Ac-

knowledge when the ARC returns a Comms Acknowledge signal. (Use Com-

mand 101 to enable comms.)

2. The control unit delays reporting/loging either mains loss, or exiting engi-

neering with mains loss, by 15-18 min (chosen randomly). If you chose a

Scandinavian default in Command 0 then the control unit waits at least 60

minutes before reporting.

Confirmation Timer (Command 160)

Note: Enable Alarm Confirmation (Command 89) to access this Command.

This Command controls a timer. The timer starts when an alarm is triggered

for the first time. If a second alarm is triggered before the timer expires then

the control unit transmits a confirmed alarm to the ARC. You can set the

timer to any value in minutes between 1 and 999. For DD243: 2002 compli-

ance set confirmation time to default (=30 mins).

Internal Sounder (Command 161)

Note: Enable Alarm Confirmation (Command 89) to access this Command.

This Command selects whether the control unit will operate the internal

sounder for a confirmed alarm of for an unconfirmed alarm.

Option 0 The control unit operates the internal sounder for an unconfirmed

alarm.

Option 1 The control unit operates the internal sounder for a confirmed

alarm.

External Sounder (Command 162)

Note: Enable Alarm Confirmation (Command 89) to access this Command.

This Command selects whether the control unit will operate the external

sounder for a confirmed alarm of for an unconfirmed alarm.

Option 0 The control unit operates the external sounder for an unconfirmed

alarm.

Option 1 The control unit operates the external sounder for a confirmed

alarm.

Confirmation After Entry (Command 163)

Note: Enable Alarm Confirmation (Command 89) to access this Command.

This Commands controls how the system treats alarms that arise during

entry. The options select the number of non-entry route zones that must be

triggered to provide a confirmed alarm during the entry time.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 101 102

Sin comentarios

Cooper Security 9853 Guía de instalación Pagina 86