Cooper Security 9853 Guía de instalación descargar pdf (Pagina 73)

4. Programming

496791 67

Notes:

1. If a Final Exit Zone is triggered, Channel 3 becomes active at the end of the

Programmed Entry time, or,

2. If Dual Ply Entry is enabled (Command 86 1) and the Final Exit zone is

triggered then Channel 3 becomes active at the end of the 30 second Dual ply

grace period, or,

3. If Alarm Abort is enabled (Command 36 1) Channel 3 restores if the user

unsets the system.

Dual Ply Entry Warning (Command 86)

Note: Disable Alarm Confirmation (Command 89) to gain access to this Command.

If users habitually exceed the entry time use option 1 to add a 30 second

extension during which the internal sounders give a warning tone. The

extension applies to both Full and Part setting.

If users exceed the dual ply entry warning during full set then the system

gives a full alarm. If users exceed the dual ply entry warning during part set

then the system gives an alarm that is determined by Commands 63 for part

set B, 73 for part set C, or 77 for part set D.

Use Option 0 (default) to disable Dual Ply Entry.

Keypad Dual Key Alarms (Command 87)

This Command allows users to raise a alarms by pressing two keys on the

keypad at the same time. When this facility is enabled (option 1) the alarms

available are:

PA alarm keys 1 and 3

Medical alarm keys 4 and 6

Fire alarm keys 7 and 9

Use option 0 to disable this Command.

Note that this Command also enables PA from keyswitches (See “9928 Installation

Guide”.)

Alarm Confirmation (Command 89)

Option 1 allows you to program the control unit for Alarm Confirmation

(verified alarm), if required by your local Police Intruder Alarms Policy. (Use

this option to comply with DD243: 2002.)

When a detector causes an alarm the control unit activates Channel 3 (Burg).

If the intruder triggers the second detector within the alarm confirm time then

the control unit activates the programmed alarm confirmation channel.

Option 0 disables Alarm Confirmation.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 101 102

Sin comentarios

Cooper Security 9853 Guía de instalación Pagina 73