Cooper Security 9853 Guía de instalación descargar pdf (Pagina 80)

4. Programming

74 496791

1. Enter programming mode (if you are not already there).

2. Key in 117 at the keypad.

The display shows:

3. Press .

The display shows (for example):

4. Key in the digits of the account code for partition A . (If the account code

is correct simply press .) Press C between each digit to move the

cursor to the right. Press D to move the cursor to the left to correct any

mistakes. Press when the account code is correct.

The control unit stores the account code you

entered and displays the account code for

the next partition (for example):

5. Repeat step 4 for the account codes for partitions B, C and D.

Note: Some European countries use letters in the account code. The control unit can

accept any of the letters B, C, D, E and F as part of the account code. To enter

a letter at step 4 press 2 or 3 repeatedly until the letter you require appears on

the display (see “Zone Programming - Zone Names”).

Downloader Telephone Numbers (Commands 118/119)

Use this option to program up to two separate, 31-digit telephone numbers

that the system will use during downloading. When a connection has been

made, the remote PC operator selects the telephone number which the

control unit will call back to (for example home or office).

You can use the A key to insert a pause (four seconds).

To enter a number:

1. Enter programming mode (if you are not already there).

2. Key in 118 (or 119) at the keypad.

The display shows (for example):

3. Press .

4. Key in the digits of the number. If necessary press D to move the cursor

to the left to edit or delete the number. Press C to move the cursor to

the right.

The display shows (for example):

5. Press .

The system stores the number.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 101 102

Sin comentarios

Cooper Security 9853 Guía de instalación Pagina 80