Cooper Security 9853 Guía de instalación descargar pdf (Pagina 78)

4. Programming

72 496791

Use Command 114 if you want the control unit to answer incoming calls from

<Downloader> without an engineer being present.

Rings to Answer (Command 112)

Use this option to set the number of rings that the system waits before

answering an incoming call from the remote PC. See “Programming Com-

mands” for the available options.

Answer on One Ring (Command 113)

(Answer phone defeat) Use this feature if the alarm system shares a line with

other equipment.

One ring off (0) Disabled

One ring on (1) <Downloader> “warns” the alarm system that a call is

coming by ringing the alarm system number, waiting for

between one and two rings and then hanging up. The

alarm system now knows to expect a call within the next

10 to 90 seconds. <Downloader> then rings the alarm

system again, within 10 to 90 seconds. The alarm system

answers after the first ring.

Note: When using "Answer on 1 Ring" set the number of rings in "Rings to Answer"

(C112) to a higher number than that used by the equipment sharing the

telephone line with the alarm system. If you do not, then the other equipment

will never answer any incoming calls.

Access Mode (Command 114)

This function allows you to provide extra security when a remote PC is

dialling into the system. Once the PC is connected to the system then the

<Downloader> has access to all system programming Commands. If you

wish to provide secure access then either use Option 0 or Option 1 below.

Alternatively you can use Command 110 if you want an engineer present to

provide access for a remote PC connection to the panel. Please note that

you cannot use secure callback with Command 110.

Option 0 Call Out Only. Operation: Someone must start a call to the remote

PC manually using Command 0 in User Mode. User Command 0

calls the first <Downloader> telephone number (see Command

118).

Option 1 Secure Callback. Operation: When the remote PC calls, the

system waits for the set number of rings (see Command 112) and

then answers. The remote PC sends a panel ID, the <DOWN-

LOADER> software version, and indicates which of the two

Downloader Telephone Numbers to use (see Commands 118/

119). The system checks that the remote PC is sending the

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 101 102

Sin comentarios

Cooper Security 9853 Guía de instalación Pagina 78