Cooper Security 9853 Guía de instalación descargar pdf (Pagina 82)

4. Programming

76 496791

In addition, if you have used Command 121 to program channel 3 with Fast

Format communications then the control unit will add a 20 second delay

before dialling an alarm call.

To disable Communication Acknowledge use option 0.

Report Restorals (Command 123)

This option is only available if you have selected Scancom Fast format in

Command 103.

Restore off (0) The system does not communicate restorals.

Restore on (1) Enabled. The system will communicate restorals.

Reverse Open/Closed (Command 124)

Note: This Command is normally used in France.

This option is only available if you have selected Scancom Fast format. With

this option enabled the Open/Close Fast Format channel is reversed as

follows:

Option disabled Option enabled

On setting system False True

On unsetting system True False

Note: This option does not afffect the separate Open channel and Close channel.

No Closing Signal if More Than One Circuit Omitted

(Command 125)

Note: This Command is required for Belgian BVVO approval.

This option is only available if you have selected Scancom Fast format.

When this option is enabled the control unit will NOT transmit a Close signal

if a user has omitted two or more zones.

Select Language (Command 126)

The control unit can display messages on the keypads in one of several

different languages. Use Command 126 to select the language you wish to

use. The options available are:

Option 0: English (default) Option 5: French

Option 1: Italian Option 6: German

Option 2: Spanish Option 7: Norwegian

Option 3: Portuguese Option 8: Swedish

Option 4: Dutch Option 9: Danish

Radio Zone Supervision Fail Response (Command 128)

If the system is fitted with a 9955 Radio Expander then all the radio zones are

supervised. Should a radio zone not communicate with the 9955 expander

for one hour or more then the 9955 reports a supervision failure to the control

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 101 102

Sin comentarios

Cooper Security 9853 Guía de instalación Pagina 82