Cooper Security M2000 Guía de usuario descargar pdf (Pagina 81)

Engineering Manual Engineer Menu 1-5

Use the following steps and the flowchart to set up Time Switches:

Step 1 – Select the Time Switch

Press | or ¬ to select a Time Switch. If you wish, you can key in the number of the Time Switch

to select it directly (use leading zeroes for timers 1 to 9). Once you see the required Time Switch

on the display you can show a summary of its details by pressing r repeatedly.

Press [ to start editing the Time Switch.

(At this point, if you do not wish to override the Time Switch’s current status or key in a

description, you can skip to step 3 by pressing | twice.)

Step 2 – Key in Description

When the bottom line of the screen shows “Description” press [ once more.

Key in the text of the description. When the text is complete, press [. Press | to move on to

specifying the On and Off Time/Days.

Step 3 – Key in Time/Days for Timers (1), (2) & (3)

There are three independent on/off timers for each Time Switch. The top line of the display

shows the number of the timer as digit after a decimal point following the number of the Time

Switch. For example, the first of the three timers for Time Switch 1 is “TS 01.1”, the second is “TS

01.2”.

If the bottom line of the screen shows “## ### – ## ###” then the timer is disabled. Press [ to

start editing the setting time.

Key in the start of the setting time in 24 hour format (hours then minutes). Press [ to save your

changes.

Press any number 1 to 7 in order to specify the days of the week on which to start setting. Note

that 1 = Sunday, 2 = Monday and so on until 7 = Saturday. If you wish to specify every day of

the week press 9. If you wish to clear all the days of the week press 0.

Press [ to save your changes.

Step 4 – Select Exceptions

Press | to move on to selecting Exceptions. The bottom of the display shows the number of

Exceptions currently allocated to the Time Switch.

Press [ to start allocating any of the pre-programmed Exceptions to the current Time Switch.

The top right corner of the display shows “No” if the Exception does not apply to the Time

Switch, and “Yes” if it does. (Press r if you want to see a description of the Exception.)

Press | to select the Exception you wish to apply.

Press [ to display a cursor next to the “No”.

Press r to change the “No” to a “Yes”. (If you change your mind press r again.). Press [ to

save your changes.

Press ] to leave applying Exceptions. Press ] again if you have finished editing the current

Time Switch.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 179 180

Sin comentarios

Cooper Security M2000 Guía de usuario Pagina 81