Cooper Security M2000 Guía de usuario descargar pdf (Pagina 63)

Engineering Manual Engineer Menu 1-4

16 – Settling

Activates when the Exit Settle timer (page 63) is running for the selected ward.

17 – Clear

Activates when the selected ward has no tamper conditions and no zones activated. The

output deactivates when the selected ward has a tamper or zone activation.

18 – Tamper

Activates when any type of tamper condition is triggered in the selected ward; deactivates

when all tamper conditions have been reset in the ward. This output acts as a "global"

tamper indication for any type of tamper associated with the ward.

19 – Reset Req

Activates when the selected ward requires an engineer or remote reset; deactivates when

the ward has been reset either by the engineer or by a remote reset.

20 – Lock-Out

Activates when a security key (page 27) has locked out keypads in the selected ward;

deactivates when the Security zone type is no longer active.

21 – Chime On

Activates when any zone in the selected ward causes a chime tone, as determined by the

Chime Tone attribute (page 29).

22 – Monitor

If the output is latched, the output activates when a zone that has the Monitored attribute

(page 30) and is in the selected ward activates, and deactivates when the zone deactivates.

If the output is pulsed, it activates when a zone that has the Monitored attribute and is in

the selected ward activates, and remains active for the pulse duration.

23 – Alm Abort

Activates after an alarm in the selected ward has been aborted by the user; deactivates

when the Abort Period timer (page 63) has expired, or when the alarm is reset (whichever

occurs first).

24 – Entry

Activates when the Entry Delay timer (page 61) is running for the selected ward;

deactivates when the selected ward is unset or when the Entry Delay timer expires.

25 – Exit

Activates when the selected ward starts the exit procedure; deactivates when the selected

ward is set.

26 – Exit/Ent.

Activates when the selected ward is in entry or exit mode.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 179 180

Sin comentarios

Cooper Security M2000 Guía de usuario Pagina 63