
Introduction Engineering Manual
6
The control panel can be easily connected to the telephone network using the on-board RJ11
telecom socket. Alternatively, a PSTN terminal block is provided for optional wired connection.
More recent versions of the control unit pcbs also provide molex connectors for a plug-on adsl
filter: Cooper Security part ADSL01.
Printer Port
A serial printer such as a DATAC printer can connect to the control panel to obtain system and
log print outs, or to print all system events as they occur.
Engineer's Keypad Port
Optionally, an engineer's keypad can be temporarily connected directly to the "Engineer's
Keypad" port on the control panel. The keypad can be disconnected without causing a tamper
alarm.
An engineer's keypad is intended to be temporary connected to the control panel for system
configuration and testing at the control panel. The keypad can be disconnected without causing
an alarm. Once a system has been set up, system configuration should normally be carried out
from a standard keypad.
CPA6 Output Module Port
Both panels include a port for CPA6 Output Modules (page 8). (Note that the CPA6OM is now
obsolete.)
External Bell Output
The control panel has one external bell output to drive standard Self-Activating Bell (SAB) or
Self-Contained Bell (SCB) modules. Additional external sounders can be driven from MSNodes
using, for example, the 8600 relay module (ensure that the 1A rating of the relay module is
adequate for the sounder). You will need an external 12V power supply to drive external
sounders switched by an 8600 relay module.
Extension Loudspeaker Connectors
Up to two extension loudspeakers can be connected to the control panel (or one on any
MSNode).
Back Tamper Switch
The back tamper switch ensures that unauthorised removal of the lid can generate an alarm
condition.
Battery Backup
The control panel can be fitted with a 7AH or 17AH battery to enable the system to function in
the event of a mains failure.
Compatible Devices
System expansion is achieved by using the following devices.
Comentarios a estos manuales