
Engineer Menu 2-7 Engineering Manual
126
Option 2-7-2-3 – Testing the Digi On Board Channels
Channels
9-16: ********
Channels
9-16: 1*******
[
1234567890123456
1234567890123456
Test Outputs 3
Digi On Board
Channels
1-8: ********
1
r
If required, press
r
to display
next set of channels
1. SELECT DIGI
ONBOARD C HANNELS
2. TOGGLE OUTPUTS
Press when you have finished
]]
e.g.
Enter output number (1-8) to
toggle output on/off
Outputs 1-8
Outputs
(* = off)
This option allows you to switch on or off the 16 digi on-board channels (the 16 "software"
outputs, the status of which are transmitted via the on-board modem port). You will need to
contact the Alarm Receiving Centre (ARC) for verification that the channels are functioning
correctly.
Option 2-7-2-4 – Testing Equipment Outputs
1:01:2 Remote
1:02:2 Remote
Is Turned OFF
1:02:2 Remote
Is Turned ON
[
1234567890123456
1234567890123456
Test Outputs 4
Equipment
1:01:1 Remote
[
r
|
2 . PRESS ENT
3. TOGGLE OUTPUT
Press when you have finished
]
]
e.g.
Press to view output status
[
Press to toggle output on/off
r
Zone no. (netwo rk 1,
device 01, output 1)
1. SELECT OUTPUT
To select output:
Pr e s s o r
|¬
r
to scroll, or
Enter network and device number (e.g. 1012
for network 1, device 01, output2)
Press to change network
This option allows you to switch outputs connected to network devices, such as keypads, on and
off.
Comentarios a estos manuales