Cooper Security i-on 16 Guía de usuario descargar pdf (Pagina 48)

Programming i-on16

Page 44

Siren Time

To change the length of time that the system operates

the siren during an alarm select System Options-Siren Time.

Note: The durations offered by the display apply to a

siren wired directly to the control unit.

The 760ES radio siren has one of three fixed sounder

durations in an alarm: 5seconds, 3mins or 15mins.

These fixed durations are designed to preserve the

battery life of the radio siren.

Supervision

If a detector loses contact for more than two hours then

the control unit raises an alarm. The options available for

this alarm are:

Option: With system SET,

the control unit:

With system UNSET

the control unit:

Disabled Does nothing. Does nothing.

Fault Logs the event (but

does NOT display any

alert or fault tone).

Displays an Alert and

sounds a fault tone and

logs the event.

Jamming

The control unit can detect interfering (or "jamming")

radio signals. To enable jamming detection select System

Options - Jamming.

If the control unit detects jamming once you have

enabled this option then the display shows an Alert

message for the user.

Force Set

You may wish to allow a user with a remote control to set

the alarm system when one or more of the detectors are

not working or are open (active).

Note: If you enable “Force Set” then the system does not

comply with EN50131.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 67 68

Sin comentarios

Cooper Security i-on 16 Guía de usuario Pagina 48