Cooper Security i-on 16 Guía de usuario descargar pdf (Pagina 26)

Installation i-on16

Page 22

ABCEA1B1

Se e N o t e

PSTN

WARNING: Telecommunications Network Voltage

A, B Connect to PSTN

A1, B1 Connect to local phone extension (if required)

E For added surge protection connect to a suitable protective earth.

C Note: (UK only) connect to ringing wire from PSTN and to ringing wire on

extension phone, if fitted.

Figure 20. Telephone Connection

Note: The microphone for recording speech messages is

on the I-SD01 module, as well as a small speaker

that allows you to playback the messages.

If you intend to record speech messages, and the

user’s keypad is already fixed at some distance from

the central station, you may wish to temporarily

connect a second keypad to the end station. This will

enable you to program the system and easily

record/playback any speech messages.

Alternatively, you can enable the end station tamper

switch to act as a start/stop/playback recording

button. See page 54 for details.

Removing an I-SD01

If you wish to remove an I-SD01 from a system then

make sure that you first

disable calls in both the Reporting

– Alarms – Call mode menu (see page 46 ) and in the

Reporting – Speech Dialler – Call mode menu (see page 53 ).

If you do not do this then the end station will continually

report a PSTN line fault.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 67 68

Sin comentarios

Cooper Security i-on 16 Guía de usuario Pagina 26