Cooper Security 9751 Guía de instalación descargar pdf (Pagina 67)

4. Programming

496792 61

Level C Entry Time (Command 74)

This Command sets the entry time for Level C. See “Programming Com-

mands” for options.

Level C Exit Time (Command 75)

This Command sets the exit time for Level C. See “Programming Com-

mands” for options.

Level D Exit Mode (Command 76 (9752 only))

Command 76 specifies the exit mode for Level D.

Option 0 The keypad sounders and any internal sounders give a low tone

when entering Part Set Level D. Use Command 79 to select the

exit time.

Option 1 Instant Set (no exit tone)

Option 2 Silent Set. Use Command 79 to program the Exit time. At the end

of the exit time the keypad gives a double beep confirmation tone.

Option 3 Lock Set. See “Level A Exit Mode (Command 39) for an explana-

tion of Lock Set.

Option 4 Level D exit mode is the same as Level A. The system gives full

volume setting tones.

Level D Alarm Response (Command 77 (9752 only))

Command 77 specifies the alarm response for Part Set Level D.

Option 0 Keypad sounders only.

Option 1 Internal sounders and keypad sounders.

Option 2 Local alarm (internal and external sounder only).

Option 3 Full alarm (communication and internal/external sounders).

Level D Entry Time (Command 78 (9752 only))

This Command sets the entry time for Level D. See “Programming Com-

mands” for options.

Level D Exit Time (Command 79 (9752 only))

This Command sets the exit time for Level D. See “Programming Com-

mands” for options.

Output Programming (Commands 81, 82 and 83)

The system has three transistorised, high current, programmable outputs.

Command 81 programs output 1, Command 82 programs output 2 and

Command 83 programms output 3. All three Commands take a single follow-

ing digit that selects the function.

Note: The outputs are a "pull down” type that provide negative applied control

signals. The outputs are +12V when inactive, and 0V when active.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 95 96

Sin comentarios

Cooper Security 9751 Guía de instalación Pagina 67