Cooper Security 9651 Guía de usuario descargar pdf (Pagina 4)

1. Introduction

Page 4 11980075

Keypad

Your alarm system is fitted with a 9941 or 9943 keypad, from which you can

set and unset the system. Figure 1 shows the main features of these keypads.

Refer to "4. Special Functions" on page 17 for information about other

functions available from them.

The system will not accept commands from the keypad until you identify

yourself with an access code or proximity tag (see below). The system can

store up to 50 access codes, which may contain four or six digits

, giving

secure access for up to 50 users.

If you enter an incorrect code, press X to clear the display and try again. If you

enter an incorrect code four times, all keypads will be locked for 90 seconds.

If you do not enter a command within 20 seconds, the system leaves

command mode. You will need to enter your code again to continue.

Your installer may have set up your system to hide status information

. If so,

the display and lamps show no information until you identify yourself. This

feature is designed to make life more difficult for intruders.

Proximity Tags

So that you do not have to remember access codes, your installer may have

fitted 9943 keypads, which can read proximity tags. These tags are small slips

of plastic that have electronic circuitry built into them.

When you hold a tag against a 9943 keypad, the circuit inside the tag emits a

radio code that the keypad reads. Each tag has a unique code. If the alarm

system recognises the tag, it allows you to do almost anything that you could

do with an access code. If the tag is not recognised, you cannot use the alarm

system. The whole of the 9943 keypad case is sensitive to tags.

You can program the system to recognise up to 49 tags. U01, the master

user, can only be assigned an access code – a proximity tag cannot be

assigned to this user. For instructions, refer to page 24.

Installer Command 56

Installer Command 28

1 2 3 4 5 6 7 8 9 ... 27 28

Sin comentarios

Cooper Security 9651 Guía de usuario Pagina 4