Cooper Security 9651 Guía de usuario descargar pdf (Pagina 23)

4. Special Functions

11980075 Page 23

When the system is delivered from the factory, all access codes are set to

default values. Depending how your installer has set up the system

, access

codes may contain four or six digits. The default for the master user (U01) is

"1234" when four-digit codes are in use and "123456" when six-digit codes

are in use. The master user should change this immediately to a code known

to no one else.

The other defaults are "X002" for U02 through to "X050" for U50. As default

codes cannot be used to set or unset the system, or use any of its special

functions, they do not need to be changed until they are assigned to users.

Do not assign access codes starting with zero. That is, use codes within the

range 1000–9999 (or 100000–999999 if using six-digit codes).

Access Codes

To set the access code for a user:

1. Key in the master user access code.

2. Press 4.

The display prompts for the access code that you

wish to change:

Old Code=

----

Key in the code (for example, X023 – the default

code for User 23) and press y.

The display shows the user number (U23) and the

user name (User 23):

U23:User 23

If you wish to change the name, use the keypad as

described in Changing User Names on page 24.

When the user name is correct, press y.

The display shows (for example):

User 23:

----

5. Key in the new access code, starting with a number

in the range 1–9. The display shows (for example):

User 23 = 4926

Press y to store the new access code

(in this case, 4926).

Installer Command 56

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

Sin comentarios

Cooper Security 9651 Guía de usuario Pagina 23