Cooper Security 9651 Guía de usuario Pagina 22
- Pagina / 28
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
4. Special Functions
Page 22 11980075
Testing Zones
You can set the system so that it will allow you to walk around and test each
of the detectors (a walk test). Do this when the premises are empty to avoid
other people triggering movement detectors before you do, which would
confuse the results of the test. If a detector fails the test, contact your alarm
company and ask them to check the system.
Notes:
1. You can abandon the test at any time by pressing y.
2. You cannot test 24-hour zones (including Fire and PA) or tamper circuits with this
command. If you wish to test them, contact your alarm company.
To test zones:
1. Key in an access code (or present a tag).
2. Press 9.
This display shows:
Walk Test
3. Walk around your premises and trigger the
detectors in turn (excluding 24-hour and PA
zones).
When you trigger a detector, the keypad and
internal sounder give a short tone.
The display shows 'A' for alarm, followed by the
zone number of the detector.
If you trigger more than one detector, the display
shows the zone numbers in turn.
A: Zone 02
4.
Press y to stop the test when you have triggered
all the detectors.
Setting up Users
Note: Only the master user (U01) can set up users.
The system can store up to 50 different user access codes. For security, you
should give one code to each person who has responsibility for setting and
unsetting the system: do not allow users to share codes.
To distinguish users and conceal their access codes, the log shows each user
as a number (for example, U02). You can store a user name for each access
code, which is visible when the code is modified but not displayed or logged.
- Contents 2
- 1. Introduction 3
- Proximity Tags 4
- Mains Power Failures 6
- About this Guide 7
- 2. Everyday Operation 11
- 11980075 Page 11 11
- 2. Everyday Operation 12
- Page 12 11980075 12
- Zone Open Z03 12
- Zone 03 12
- Installer Command 27 12
- 11980075 Page 13 13
- Installer Command 28 13
- Unsetting the System 14
- 11980075 Page 15 15
- Installer Command 36 15
- 3. After an Alarm 16
- 4. Special Functions 17
- Viewing Alerts 18
- Omitting Zones 19
- Reading the Log 20
- Turning the Chime On and Off 21
- Testing the Sounders 21
- Testing Zones 22
- Setting up Users 22
- Page 24 11980075 24
- Installer Command 49 24
- Setting Time and Date 25
- Appendix. Log Messages 26
- Your Installation 28
Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Cooper Security 9651
(90 paginas)Lincoln Electric IM718 POWER WAVE AC_DC podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Ekwipunek Lincoln Electric IM718 POWER WAVE AC_DC.
Dostarczamy 1 pdf podręczników Lincoln Electric IM718 POWER WAVE AC_DC do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Comentarios a estos manuales