Cooper Security 9651 Guía de usuario descargar pdf (Pagina 10)

2. Everyday Operation

Page 10 11980075

Timed Set

With Timed Set, the system sets after a programmed exit time has expired.

The time starts when you press a level key, or when you press y to accept an

omitted zone. Your installer will have made the exit time long enough for you

to leave the premises and secure the final door

When using Terminated Set (see below), your installer may have

programmed the system to set after the exit time even if the exit terminate

button is not pressed. This ensures your premises are protected if you forget

to press the button.

Final Door Set

Your installer may have programmed the system so that closing the final door

completes the setting sequence. The system sets 7–12 seconds

after you

secure the final door. There is no fixed exit time.

Lock Set

Your installer may have fitted a special lock so that locking the final door

completes the setting sequence. The lock contains a switch so that the control

unit can sense whether the lock is open or closed. The system sets seven

seconds after you lock the final door. There is no fixed exit time.

Note: Lock Set is available only for Level A (Full Set).

Terminated Set

Your installer may have fitted an exit terminate button. This is usually outside,

beside the final door, and you press it when you leave. The system sets

seven

seconds after you press the button. There is no fixed exit time.

Silent Set

Some levels on your system may be programmed for Silent Set. The system

does not give an audible warning when it sets these but it gives a double

"beep" at the end of the exit time to show that it is set.

Note: Silent Set is not available for Level A (Full Set).

Instant Set

The area protected by a level may not need an exit route or final door. With

Instant Set, the system sets as soon as you press the appropriate key, without

Installer Commands 44, 65, 75 and 79

Installer Command 182

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Sin comentarios

Cooper Security 9651 Guía de usuario Pagina 10