Cooper Security i-on40 Manual de usuario descargar pdf (Pagina 28)

Administration i-on40

Page 24

you cannot test 24 hour or fire zones.

Outputs The bottom line of the display shows the first in a

list of the outputs installed on the system. Select

the output you wish to test. Press Y to finish the

test.

NOTE: Make sure no one tries to activate an by

means of a remote control while you perform the

test.

When you complete the test check that the

output is still in the state you wish it to be in.

Remotes Press any button on the remote control. The

display shows the identity and user of the remote

control, and the button that the control unit

believes you pressed. Press all the buttons on

the remote control in turn.

Panic Alarms Press both buttons on the panic alarm

transmitter. The display shows the identity of the

user assigned to the panic alarm.

Proximity Tags Present the tag to the front of the keypad. The

display shows the user assigned to the tag.

System Configuration

The System Configuration option allows you to change some

parts of the system to suit your particular needs. If you need

more extensive changes to the operation of the system then you

must contact your installer.

Make sure the system is unset and the display shows the time

and date, then:

1. Enter the Menu and select System Config.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Sin comentarios

Cooper Security i-on40 Manual de usuario Pagina 28