Cooper Security i-on160EX Manual de usuario descargar pdf (Pagina 42)

3. Setting and Unsetting i-on40 & i-onEX Range

Page 36

Setting the System

Press and

hold:

The setting LED flashes red three

times.

The system sets. The control unit

sends a message to the fob.

Note: If the Installer has

programmed the system to complete

setting by Lock Set (see page 28)

then you must go to the designated

lock and lock it in order to complete

the setting process.

The setting LED glows green for three

seconds.

Part Setting the System

Press and

hold:

The part setting LED flashes red three

times.

The system part sets. The control unit

sends a message to the fob.

The part setting LED glows green for

three seconds.

Unsetting the System

Press and

hold:

The un-setting LED flashes red three

times.

The system unsets.

The unset LED glows green for three

seconds.

Unsetting After an Alarm

If your alarm system started an alarm while the system was set

then, when you come to unset the system, your fob will indicate

this by lighting all the LEDs red, as follows:

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 121 122

Sin comentarios

Cooper Security i-on160EX Manual de usuario Pagina 42