Cooper Security M2000 Guía de usuario descargar pdf (Pagina 15)

Option 1-8: Setting Up Silent Set Wards

This option enables you to select which of

your wards (if any) set silently, without emitting

an exit tone, when the system is set normally.

The wards remain enabled for silent setting

until you deselect them in this option.

Pressing 8 when the display shows

"0=SET WARDS" can set all your wards

silently, irrespective of their setting here

User 1 Menu 8

Silent Set Wards

1. Press [ to select this option.

Silent set wards

Ward > **......

2. Use the numeric keys to select the wards

you want to enable for silent setting, then

press [. Any ward numbers shown are

enabled for silent setting. (A “*” indicates

that the ward will not be silent set. A “.”

Indicates that either you have no access

to the ward, or the ward has not been

programmed.

Requires P.Set Hotkey in Engineer option 1-9-1 to be set to NO

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 75 76

Sin comentarios

Cooper Security M2000 Guía de usuario Pagina 15