Cooper Security i-on 16 Manual de instalación descargar pdf (Pagina 6)

Page 6 of 16

3.6 Connect the Ethernet cable (Ethernet / IP connections) [2]

Ethernet cable supplied in the box or any standard Cat5 Ethernet cable.

3.7 Install the antenna (GPRS / GSM connection) [3]

Connect the standard T-Bar supplied in the box or a High Gain GPRS antenna with

SMA connector to improve the signal coverage (see section 3.11, for GSM network

scan).

Do not fix the antenna in place until you have performed the Run Network Scan, as

detailed in section 3.11.4, to confirm best location.

 Note the GPRS antenna shipped (T-Bar) is not meant to be stuck on the

panel or within 30cm of any metal surface.

3.8 Connect PC / Laptop to the IRIS Touch via the USB connection [4]

Please ensure that you have download and installed the latest version of the IRIS

Dialler Configuration software available from the www.chironsc.com.

Please use a standard 2 meter USB A-B cable, which will power the IRIS Touch

without having to power-up the panel.

3.9 Open the IRIS Dialler Configuration software

You will now see a Chiron adaptor in the connections. Please select and connect,

and then continue on the welcome screen.

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Sin comentarios

Cooper Security i-on 16 Manual de instalación Pagina 6