Cooper Security Homelink 75 Guía de instalación descargar pdf (Pagina 13)

Administration

Page 13

Access Code

After assigning users to one or more partitions, the

display requests you to assign an access code to the

user.

9. Key in an access code for the user.

When you press the last digit of the access code the

display asks you to key in the same access code

again. Make sure that you key in the same digits in

the same order.

Proximity Tags

A proximity tag is a small plastic token with a low

powered radio transmitter inside. Each tag contains a

unique identity code. Inside the control unit, at the top

left corner of the case, is a sensor. When you present the

tag within about 10mm of the front of the case, at the

top left corner, the control unit senses the presence of

the tag and reads its identity code.

If a user presents a tag that the control unit recognises

then the control unit allows the user to access the system

in the same way as if they had keyed in a recognised

access code.

When you have finished giving the new user an access

code, the control unit then gives you the opportunity of

registering an proximity tag for the same user.

10. Present a tag to the top left corner of the case.

The control unit learns the identity of the tag, and

the display asks you to register a telecommand

(see below).

You cannot register more than one tag per user. If

you present a tag that the control unit has already

registered to another user then you will hear a

single low tone and the display will remain asking

you to present the tag.

If you do not wish to register a tag for the user

then press "NO TAG"

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Sin comentarios

Cooper Security Homelink 75 Guía de instalación Pagina 13