Cooper Security i-on16 Guía de instalación descargar pdf (Pagina 10)

1 Introduction i-on16

Page 10

Communications

Your system may be fitted with a communication module that

allows the control unit to send alarm information over the

telephone network.

Controls and Displays

Figure 2 shows the controls and displays available on the keypad.

1. LCD display .

2. Programming keys.

3. Navigation key

4. Setting and

unsetting keys.

5. Hold Up Alarm (HUA)

keys.

6. Alpha/numeric keys.

7. Set/Unset status

LEDs.

Figure 2. Controls and Displays

Controls:

Full Sets the system. (All detectors in use.)

B, C

and D

Part Set the system. (Some of the detectors in use.)

Unsets the system.



In menus: scroll up. In text editing: move cursor left



In menus: scroll down. In text editing: move cursor right.



If the bottom line of the display shows a “>” at the right then

pressing this key selects the submenu named on that line.

If the bottom line of the display shows “On” “Off” “Yes”

“No” “I” (for include) “O” (for omit) then pressing this key

changes the value to its opposite.

When editing names moves the cursor to the right.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 89 90

Sin comentarios

Cooper Security i-on16 Guía de instalación Pagina 10