Cooper Security M800 Guía de usuario descargar pdf (Pagina 9)

7

Option 1-3: Shunting 24hr Zones

This option enables you to shunt (disable) all

zones in selected wards that have been set

up as shuntable in Engineer option 1-1.

Shunting disables a zone and the shuntable

attribute identifies whether this is permissible.



This is normally used for 24-hour zones

but can be applied to other zone types.



Zones remain shunted until you use the

Reinstate 24hr option (see below).



Reinstating zones may start the exit timer,

depending on whether Unshunt, No Exit

or Unshunt & Exit is selected (Engineer

option 1-9-1).

User 1 Menu 3

Shunt 24hr Zones

1. Press [ to select this option.

1=Shunt 24hr

2=Reinstate 24hr

2. Press 1 to shunt zones or 2 to reinstate

zones that have been previously

shunted.

Shunt wards

Ward > 1*......

3. Use the numeric keys to select the wards

to shunt/reinstate, then press [. Any

ward numbers shown will be

shunted/reinstated. (A “*” indicates that

the ward will not be shunted/reinstated,

and “.” Indicates that you have no

access to the ward.)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 55 56

Comentarios a estos manuales

Sin comentarios