Cooper Security M2000 Guía de usuario descargar pdf (Pagina 22)

“Dee Dah Dee Dah...”

Office window

2002 Active

Office door

2001 Active

1. The system gives a high, rapid,

repeating tone and the display shows all

active zones in turn.

)

To abandon the setting procedure

without rectifying the active zones, enter

your user code again and press [ when

you are prompted to unset the system.

2. Investigate why the zones are active

and rectify the cause.

3. When all zones are healthy, continue

with the exit procedure.

If you cannot clear the zones by the end of the exit time, and the

system does not allow you to set with those zones active, then:

Set Fail:-

>Ward : 1.......

1. The internal sounder sounds, the

external strobe flashes and the display

shows the message shown opposite.

2. Enter your user code or present your

proximity tag to silence the sounders,

then again to reset the system.

If your system is connected to an ARC then this alarm will not call the

police. You should ask your alarm installer to check the health of the

zones that prevented you setting the system.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Sin comentarios

Cooper Security M2000 Guía de usuario Pagina 22