Cooper Security M-Series Manual de instrucciones descargar pdf (Pagina 30)

24 496478

3. Installation

Caution: The connection of only one such series apparatus is allowed

to be connected between a main apparatus (e.g., telephone)

and the PSTN.

Take care to ensure that the A and B line are connected correctly ( i.e.

correct polarity). The built in communicator continuously monitors the line for

Ringing tones.

Primary

Line

Diverted

Line

5 or A

2 or B

BT master Box

(Exclusive Line)

Telephone line to other equipment

for example: Fax, answer machines.

Figure 17. Connecting the Built In Communicator

Fitting a Plug-by Communicator

The 9750 can be fitted with a communicator or speech dialler (for example

the Scantronic 8400, 8440, 660 or RedCare STU). To fit a communicator,

follow the instructions below.

Caution: Follow the instructions in the order shown, or you may dam-

age the control unit and/or communicator.

1. Disconnect mains and battery power from the control unit and remove

the case lid, if the system has already been installed.

2. Detach the main PCB from the support pillars in the control unit case,

and lift the PCB carefully to the left.

3. Fit the communicator between the PCB support pillars, making sure that

the main PCB can fit back into position (see Figure 18).

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 70 71

Sin comentarios

Cooper Security M-Series Manual de instrucciones Pagina 30