Cooper Security i-on 16 Guía de usuario descargar pdf (Pagina 31)

i-on30EX

Page 27

4. Maintenance

The control unit should be inspected once

per year. At each inspection:

Check the control unit for obvious signs

of damage to the case or its lid.

Check the condition of the control unit

standby battery.

Check the cabling to the keypad(s) and

expander(s) for signs of damage or

wear.

Check the keypads for obvious signs of

damage.

Test the action of all buttons on all

keypads.

Clean the keypad surface and display.

To clean the keypad wipe the surface

with a clean soft dry cloth. Do not use

water, solvents or any proprietary

cleaning materials.

Monitor the signal strength and battery

condition of all detectors, radio

keypads, remote controls, PAs and radio

sounders. Test each device. Replace

batteries as recommended by the

manufacturer‟s instructions.

Gently clean the lenses of any PIRs with

a clean, soft dry cloth. Do not use

water, solvents or any proprietary

cleaning materials.

Walk test all detectors.

Test any external sounders and strobes.

Note that if you wish to find the location of

any keypad or expander you can employ

the Test – Locate Bus Device option in the

Installer Menu. Use this option to make a

selected bus device give a continuous tone

from its sounder. Once you have found the

bus device you can silence the tone either

by opening the case and so activating the

device‟s tamper, or by pressing  on the

keypad from which you are carrying out the

test.

5. Technical

Specification

General

Product name

i-on30EX.

Product

Description

30 zone hybrid endstation

with remote keypads.

Manufacturer

Cooper Security Ltd.

Environmental

Class II.

Operating

temperature

Tested -10 to +55°C.

Humidity

0 to 93% RH, non-

condensing.

Case material

Steel.

Dimensions:

Control unit

240 x 250 x 87, mm HxWxD.

Keypad

115 x 156 x 30, mm HxWxD

Weight:

Control unit

2.72 kg (without stand-by

batteries).

Keypad

0.26 kg

Capacities

Zones

30 max (with expanders)

Outputs

12 plug-by communicator

outputs on control unit, plus

30 max for the rest of the

system, comprising:

1 wired on control unit

(transistor)

4 transistor based on each

wired expander

8 radio outputs on each

768/769

2 radio outputs on each 762

Expanders and

Wired Keypads

10 max devices (see note 1)

Radio Keypads

4 max (two per radio

expander)

External Radio

Sirens

4 max (two per radio

expander)

WAMs

1 max (repeater mode only)

Loudspeakers

1 on control unit, 1 per

expander

Plug on

communication

modules

One

Other ports

1 x USB

Partitions

4 (see note 2)

1 2 ... 26 27 28 29 30 31 32 33 34 35 36

Comentarios a estos manuales

Sin comentarios